Compatible with the next-generation HDR (High Dynamic Range) content

The new D-ILA projectors are compatible with content boasting a wide dynamic range such as the next-generation Blu-ray disc that is expected to expand in the future, and over-the-top (OTT) video services. Capitalising on the native contrast, these projectors are capable of achieving visual effects that are similar to the human eye with exceptional brightness that is close to the dynamic range for camcorders and a high contrast ratio. Also, the projectors can display images with peak brightness three times (at 100 inch projection) that of conventional cinemas thanks to the adoption of a new high-output lamp. With this, what was difficult to display up until now, such as lustre and glittering, as well as details in dark areas, can be viewed simultaneously.

Complies with the latest HDMI/HDCP 2.2 standards to enable full specification 4K signal input

The projectors are capable of receiving full specification 4K signals including 4K 60P 4:4:4, 4K 60P 4:2:2/36-bit and 4K 24P 4:4:4/36-bit as the units comply with the latest HDMI standard with 18 Gbps transmission band width compatibility for reproducing more vivid colours with more precise gradation. In order to be compatible with copyright-protected content such as OTT video services and the next-generation Blu-ray disc, the projectors comply with the latest HDMI standard and HDCP 2.2. With the two HDMI terminals, up to 2 copyright-protection compatible HDMI devices can be directly connected.

Original 4K e-shift Technology continues to evolve

JVC’s e-shift technology shifts sub-frames by 0.5 pixels both vertically and horizontally to achieve 4 times the pixel density of the original content. The latest e-shift4 Technology is capable of inputting full-spec 4K video signals including 4K 60P 4:4:4 thanks to the optimised engine and the newly adopted high power lamp. These improvements result in an even higher definition picture with more precision.

New Multiple Pixel Control

JVC’s original high-performance image processing technology, Multiple Pixel Control, has been improved to match the trend towards higher resolution. Through adoption of a new analysis algorithm, the MPC is now capable of more accurate diagonal detection between frames for both full HD and full 4K resolution signals, delivering a thoroughly immersive high-definition 4K image.

Clear Motion Drive with High-speed LSI

Further improvement has been applied to JVC’s original Clear Motion Drive. It now is compatible with 4K60P 4:4:4 signals for reproducing moving images without ghosting or after image issues.

New Motion Enhance

Colour Management System with 6-Axis Matrix

A 6-axis matrix of red, green, blue, cyan, magenta, and yellow enables the precise adjustment of hue, saturation, and intensity. Only the colour being adjusted will be shown in colour while the others are grey-toned, making operation more intuitive.

Auto-Calibration Function

Using an optical sensor, precise calibration can be performed in just a few easy steps to match the changes in optical characteristics caused by installation situation of the projector. Auto-Calibration optimises all essential elements found in the image, including colour balance, gamma characteristics, colour space, and colour tracking.

^{Exclusive JVC software installed on a PC connected to the projector via a LAN connection and optical sensor are required to set viewing configurations and auto calibration. Please visit the JVC website for the details.}

Screen Adjustment Modes

The projector selects the best mode to match the screen being used for images with natural colour balance*9. The modes are compatible with the latest models offered by the world's major screen manufacturers.

^{Refer to JVC website for a comparison of primary screens and adjustment modes.}

Pixel Adjust Function

The Pixel Adjust function allows users to precisely correct colour deviation in 1/16-pixel increments. It is also capable of segmenting the entire screen into 121 points and adjusting them individually to realise clearer video without colour deviation. Two settings can be stored in the memory.

Control4 SDDP Compatibility

JVC’s new D-ILA projectors are compatible with Simple Device Discovery Protocol (SDDP) by Control4. When an SDDP-compatible device is added into a Control4 system, it is automatically recognised by the system and automatically adds driver to the projector to enable external control in no time.

^{Requires separate home controller and application.}

Even brighter and high-quality 3D images of D-ILA

In addition to JVC’s original Frame Addressing method to reproduce 3D images with vivid colours, the optical engine featuring a set of new D-ILA devices is capable of achieving more brightness. Furthermore, 3D image adjustment functions such as Crosstalk Cancelling are featured to offer the kind of realistic and exciting 3D images that only D-ILA can provide.