FOLLOW @DIGITALCINEMAAU ON INSTAGRAM
-
Official Leading Australian Dealer
-
Full Australian Manufacturers Warranty
-
Shipped with Tracking and Complimentary Insurance
With a footprint measuring just 16-Inch in diameter, the PC-4000 is the pinnacle of SVS’ iconic cylinder subwoofer designs, achieving unparalleled low-frequency output and deep bass extension down to 15 Hz. The unique form factor uses vertical height to add cabinet volume while a high-excursion, down-firing 13.5-inch driver and 1,200 watts RMS, 4,000+ watts peak power amplifier delivers concert and cinematic level bass with pinpoint control and accuracy to amaze serious home theatre fans and the most discerning audiophiles.
Reference Caliber Bass with Less Floorspace Required
The SVS PC-4000 powered subwoofer astounds with its ability to command a room with massive low-frequency output and deep bass extension that can be heard and felt while maintaining accuracy and control, all from a cylinder cabinet measuring only 16” in diameter. With trickle-down technology from the 16-Ultra Series, named top subwoofers in the world by nearly every audio publication and industry group in 2017, the PC-4000 shatters expectations and delivers a level of unrivalled subwoofer performance only available from SVS.
High-excursion SVS Driver – Legendary SVS Output and Control
The PC-4000 subwoofer driver delivers on the full potential of the Sledge STA-1200D amplifier’s immense power with precision and control to produce room energising SPLs and effortless low-frequency extension with pinpoint accuracy at all drive levels.
Dual ferrite magnet motor assembly weighing nearly 40lbs generates immense magnetic force and excursion of the 13.5-inch driver to produce massive low frequency output well below the limits of human hearing.
Edge wound voice coil with eight-layer aluminium flat wire minimises distortion and power compression while providing excellent heat dissipation and linearity ensuring precise control.
Lightweight and rigid composite cone with premium glass fibre dust cap generates massive output with pinpoint accurate frequency response.
Proprietary injection moulded gasket and long-throw parabolic surround ensure longevity and allow extreme excursion and SPLs.
Sledge Amplifier – Massive Output, Sophisticated DSP, Advanced Power Management
Rated conservatively at 1,200 watts RMS, and 4,000+ watts peak power, the PC-4000 Sledge STA-1200D amplifier uses an efficient Class D design combined with fully discrete MOSFET output and a sophisticated Analogue Devices DSP engine. The result is a level of effortless power and advanced processing not available from any other powered subwoofer manufacturer.
High Current Output of Fully Discrete MOSFETs with Efficiency of Class D Amplifier
The efficiency of a Class D amplifier with the ability to move massive amounts of current through the fully discrete MOSFETs enabling immense output and precise control for outstanding real-world subwoofer performance at all drive levels.
Sophisticated 50 Mhz High-Resolution Analogue Devices Audio DSP
The most advanced digital processor ever used in a subwoofer maintains pinpoint accuracy and pristine sound quality through advanced in-room tuning, optimised frequency response curves, powerful DSP controls and more.
Variable Port Tuning Modes
Foam port plugs come standard with the PC-4000 and allow for variable tuning. Each response curve for the three port tuning modes; standard, extended and sealed, is fully configured to the respective mode to achieve balanced and accurate low-frequency response with all tuning preferences.
Active Power Factor Correction (PFC) & Ground Loop Isolation
Serves as a line conditioner, surge suppressor and voltage regulator letting the amplifier deal with wide voltage fluctuations and ensuring the subwoofers operate flawlessly on any household circuit no matter how unstable the incoming current. An isolated circuit creates a vanishingly low noise floor by eliminating the potential for ground loop hums from outside components resulting in absolute sonic transparency.
PC-4000 Smartphone App – Easiest Way Ever to Manage Subwoofer DSP and Control
Groundbreaking smartphone app works with Apple iOS® and Android® devices to unleash the full depth, force and nuance of the PC-4000 powered subwoofer by controlling all DSP functions including volume, parametric EQ, low pass filter, phase, polarity, room gain, port tuning, custom presets and system settings.
- Connects via Bluetooth for convenient control even when the subwoofer is out of sight.
- 3-band parametric EQ controller allows precise adjustments for frequency slope and Q factor down to the single Hz level with four different slopes, so users can improve performance by eliminating peaks, nulls and other room issues.
- Stores 3 custom presets for movies, music and other listening experiences such as sports or gaming.
- 2-way feedback shows updates in real-time on both the app and subwoofer interface
SoundPath Subwoofer Isolation System for Cleaner, Tighter Bass with Less Room Rattle
Elastomer feet on the PC-4000 improve bass performance while reducing floor and wall vibrations, noise artifacts and complaints from neighbours or roommates. De-coupling a subwoofer from the floor results in inherently tighter and cleaner sounding bass. It’s also the next best thing to sound-proofing and ideal for carpeted rooms, hardwood floors or any space where room rattles, buzzes or vibrations are present.
Acoustically Inert and Rigidly Braced Ported Cylinder Cabinet Design
An inlaid front panel display, the first of its kind for an SVS cylinder subwoofer, and a stylish and durable fabric cabinet covering give the PC-4000 a refined yet commanding look that blends visually with home theatres and high-end audio systems. The unique cabinet design goes vertical to increase cabinet volume to achieve incredible low-frequency output on par with much larger ported box subwoofers, but with much less floorspace required.
- Double thick 2-inch MDF cabinet walls and rigid internal bracing to support the massive drive unit and to ensure an acoustically inert environment.
- Highly reinforced internal design and acoustic insulation eliminates all colouration or resonance from the cabinet, even when the deepest low frequencies are played at reference volume.
- Protective, non-resonant steel mesh grille and custom elastomer feet for reducing noise artifacts within a room.
- Cylinder Design
- 4000 Watts Power
- High-Excursion SVS Driver
- Dual Ferrite Magnet Motor Assembly
- Edge Wound Voice Coil - Minimise Distortion
- 8 Layer Aluminium Flat Wire - Heat Dissipation
- The most advanced digital processor
- PC-4000 Smartphone App
- Connects via Bluetooth
Brand | SVS |
---|---|
Speaker Type | Active/Powered Subwoofer |
Frequency Response | 15 Hz - 200 Hz |
Power | 4000 Watts |
Woofer Bass Driver Size (mm) | 342.9 mm |
Item Sold As | Single |
Subwoofer Size | 13.5-Inch |
Warranty | Australia Full Manufacturer Warranty |
Refund, Return and Repair Policy
Digital Cinema strives to make every purchase a happy one.
Please read our Refund, Return Warranty Policy before making a purchase from Digital Cinema, our Outlined are Our policy on refunds, returns and repairs and your rights under the Australian Consumer Law.
Always inspect any products that we have delivered to you or that you picked up from the Digital Cinema store, to make sure you are completely satisfied with the condition of the products, including that the products are of merchantable quality.
If you have any questions about this policy, please contact our staff on 1300 859 905 or click here to email.
Change of Mind
Please choose carefully as refunds for change of mind would only be accepted with a restocking fee subject to approval. We recommend you carefully choose any products before adding them to your cart and continuing with your order. The restocking fee is 25% if approved.
Goods Damaged in Transit
If any products are delivered damaged, please contact our Customer service Staff as soon as possible. Digital Cinema will organise to have your products returned to Digital Cinema and to arrange for a replacement of your products fast. Damaged products need to be returned in the same condition received by you with all original packaging, accessories and manuals.
Digital Cinema Security Policy
Digital Cinema uses the eWAY Payment Gateway for its online credit card transactions. eWAY processes online credit card transactions for thousands of Australian merchants, providing a safe and secure means of collecting payments via the Internet.
All online credit card transactions performed on this site using the eWAY gateway are secured payments.
- Payments are fully automated with an immediate response
- Your complete credit card number cannot be viewed by Digital Cinema or any outside party.
- All transactions are performed under 128 Bit SSL Certificate.
- All transaction data is encrypted for storage within eWAYÂ’s bank-grade data centre, further protecting your credit card data.
- eWAY is an authorised third party processor for all the major Australian banks. eWAY at no time touches your funds; all monies are directly transferred from your credit card to the merchant account held by Digital Cinema.
Delivery Charges
Digital Cinema will refund all delivery charges in the event an item has to be returned due to a fault or damage and no replacement items can be found. Delivery refund will only be approved within 14 days of purchase and all original packaging, accessories and manuals are included.
Consumer Guarantees and Your Rights Under the Australian Consumer Law
Refer to Consumer Guarantee laws for more information.
Refunds
Any Refunds will be made by Digital Cinema using the same method of payment used to make your purchase. Refunds will normally be processed within five (5) days.
Digital Cinema reserve the right to refund and cancel any order when the below occurs.
- Grossly incorrect pricing has been listed by accident due to human error.
- Items cannot be fulfilled due to stock issues.
- The sale is considered to be fraudulent and Digital Cinema considers the fulfillment of this sale may harm Digital Cinema.
You will be contacted by email to explain why a refund has been issued and products not delivered.
Returns and Repairs
Before returning any goods please contact our service team for approval and return merchandise number 1300 859 905
You may also contact Digital Cinema on 1300 859 905 or visit the store where the items were collected. A Digital Cinema team member will help you with any return or repair. This will include inspecting the products, organising for the products to be repaired, or offering you a replacement.
Products need to be returned within a reasonable time period. This timeframe may vary from product to product and may depend on the type of product you purchased and the price you paid.
If any goods cannot be easily returned to the Digital Cinema store, due to where you are located please contact our service staff for help with logistics 1300 859 905
Products returned under warranty will be assessed and/or repaired within a reasonable time period. You will be provided with a repair time after the item is assessed. This time may vary due to reasons beyond our or the manufacturer's control, such as parts availability and incorrect fault advice given.
You may be required to pay labour, assessment or freight costs, such as where goods are assessed to have been damaged by misuse or accident, or where the goods are assessed not to be faulty. We will provide you with a cost if this case arrises.
If any electrical goods that you returned may lose settings or user saved preferences during the resetting and rebooting phases in a repair sequence.
Purchasing from Digital Cinema is an acceptance of the above policies.
If you have any questions relating to your Order, please contact us on 1300 859 905 or email customer support on enquiry@digitalcinema.com.au.