FOLLOW @DIGITALCINEMAAU ON INSTAGRAM
-
Official Leading Australian Dealer
-
Full Australian Manufacturers Warranty
-
Shipped with Tracking and Complimentary Insurance
NAD M33 BluOS Streaming DAC Amplifier is an ultra-high-performance streaming amplifier with superb audiophile sound. As a BluOS-enabled component, the M33 can be combined with other players in a BluOS ecosystem of wirelessly networked music players throughout the home for an outstanding whole-home audio system. With the employment of the new Purifi Eigentakt™ Hybrid Digital amplifier technology, the M33 follows NAD’s long-standing tradition in identifying and developing cutting-edge amplification technology. With a minimum of 200W per channel on tap, the result is lifelike performance, exemplified by ultra-low distortion and noise.
DIRAC Live Room Correction On Board
Experts agree that room acoustics are the weakest link in most sound systems with room reflections deteriorating tonal balance and dynamics. Dirac, one of the most highly regarded Room Correction systems available, not only adjusts for frequency response, but unlike other room correction systems, it also optimises the impulse response. By optimizing the speaker/room interface, music sounds more natural and lifelike. Supplied with the M33 is a precision microphone to measure the room at and around the listening position so your system can be precisely calibrated for optimum performance. Even the most sophisticated loudspeakers can be markedly improved using Dirac calibration. Each of the 5 Dirac memory slots can store a unique room measurement or different frequency target curves to suit a particular musical taste or genre.
Flexibility Meets Long-Term Value
In its standard form, the M33 is very complete with a wide range of in/outputs, BluOS, Dirac, HDMI and more already fully integrated. It will meet the requirements of the most demanding users. To minimize the risk of future obsolescence, the M33 comes with two MDC (Modular Design Construction) slots that allow for further expansion. NAD introduced the MDC platform well over a decade ago and allowed updating products with new technologies which didn’t even exist at the time of introduction
Connection and Wireless Flexibility
Whether looking to connect digital or analogue sources, the M33 comes well equipped to accommodate all of these: 6 digital inputs and 3 analogue inputs, including MM phono. Around the back, the rear panel hosts two sets of speaker outputs capable of bi-wiring and a stereo Subwoofer Output with a fully configurable Digital Crossover. Airplay 2 and Bluetooth AptX-HD allow for local wireless streaming from a phone or tablet.
*Some features will be available via a future software update
Phono and Headphones Are Not Forgotten
The M33 has a high-quality MM Phono Input that rivals specialized outboard units. Accurate RIAA equalization, a clever phase-cancelling infrasonic filter, and a huge overload margin combine to bring out the best in LPs. Furthermore, headphone enthusiasts will delight at the sound of the discrete headphone amplifier, which is able to drive even planar and high-impedance studio phones. With high voltage and low output impedance, headphones will sound their best. For those who wish to enjoy their headphones but not be tethered to a cable, the integrated Bluetooth AptX-HD module makes it possible to enjoy wireless headphones as well.
Attractive Design With Outstanding Ergonomics
The all-alloy casework is elegant yet practical. The single control knob for volume is supplemented by a colour LCD touchscreen display. Rigid panels with magnetic iso-point feet provide a solid foundation for multi-layer circuit boards and intricate internal construction. The M33 employs a completely modern and fresh take on the traditional stereo amplifier, with features and performance from the future.
Smart Home Integration Made Easy
BluOS provides hands-free control with full integration of any Amazon Alexa or Google Assistant device. Through Airplay 2, control is also possible with Siri. Considerable effort has been spent to make the M33 fully compatible with all the leading smart home systems from leading companies like Apple, Crestron, Control4, Lutron, KNX and many others. This means that along with lighting, shades, HVAC, and security, the integrator or user can seamlessly control the BluOS multi-room music system from a common interface. All integrations are certified for reliable operation. The custom BluOS Apps for iOS and Android tablets and phones, as well as desktop control from Windows and Apple OS, are available free of charge and are updated regularly.
- BluOS Streaming DAC Amplifier
- HybridDigital Purifi Eigentakt™ Amplifier Technology
- Continuous Power: 200W into 8/4 Ohms
- 32-BIT/384kHz ESS Sabre DAC
- Dirac Live Room LE Correction*
- Colour LCD touch display
- BluOS multi-room Integration
- 2 x MDC Slots for Future Expansion
- Wireless control with AirPlay 2 and aptX HD Bluetooth Integration
- Comprehensive digital and analog connectivity including HDMI eARC
- Integrates seamlessly with leading smart home control systems
- MDC (Modular Design Construction) offers the ability to upgrade to future digital formats as they become available. Two MDC slots are provided.
- CI friendly- RS232 Serial Control Port. Trigger In/Out.
- IR In with learning function
*Some features will be available via a future software update; Full Dirac Live upgrades can be purchased through the Dirac Live software.
Brand | NAD |
---|---|
Number Of Channels | Stereo |
Frequency Response | 20 Hz – 20 kHz |
Dirac Live® Room Correction | Yes |
Input Sensitivity | 865 mV |
Signal-to-Noise Ratio | >98 dB |
Total Harmonic Distortion (THD) | <0.003 % |
LAN | Yes |
Wireless LAN (Wi-Fi) | Yes |
Wireless Technology | Bluetooth, aptX™ HD |
AirPlay | AirPlay 2 |
Hi-Res Audio Support | FLAC (24-bit/192 kHz), WAV (24-bit/192 kHz), AIFF (24-bit/192 kHz) |
Online Audio Services Support | Spotify Connect, TIDAL, Deezer, Amazon Music, TuneIn |
Smart Voice Assistant | Works with Alexa, Works with Google Assistant, Works with Siri |
App Remote Control | Yes |
Coaxial Digital Inputs | 2 |
Optical Digital Inputs | 2 |
USB A Ports | 1 |
Preamp Outputs | 1 |
12V Trigger | Yes |
IR Input/Output | 1/0 |
Warranty | Australian Manufacturer Warranty |
Refund, Return and Repair Policy
Digital Cinema strives to make every purchase a happy one.
Please read our Refund, Return Warranty Policy before making a purchase from Digital Cinema, our Outlined are Our policy on refunds, returns and repairs and your rights under the Australian Consumer Law.
Always inspect any products that we have delivered to you or that you picked up from the Digital Cinema store, to make sure you are completely satisfied with the condition of the products, including that the products are of merchantable quality.
If you have any questions about this policy, please contact our staff on 1300 859 905 or click here to email.
Change of Mind
Please choose carefully as refunds for change of mind would only be accepted with a restocking fee subject to approval. We recommend you carefully choose any products before adding them to your cart and continuing with your order. The restocking fee is 25% if approved.
Goods Damaged in Transit
If any products are delivered damaged, please contact our Customer service Staff as soon as possible. Digital Cinema will organise to have your products returned to Digital Cinema and to arrange for a replacement of your products fast. Damaged products need to be returned in the same condition received by you with all original packaging, accessories and manuals.
Digital Cinema Security Policy
Digital Cinema uses the eWAY Payment Gateway for its online credit card transactions. eWAY processes online credit card transactions for thousands of Australian merchants, providing a safe and secure means of collecting payments via the Internet.
All online credit card transactions performed on this site using the eWAY gateway are secured payments.
- Payments are fully automated with an immediate response
- Your complete credit card number cannot be viewed by Digital Cinema or any outside party.
- All transactions are performed under 128 Bit SSL Certificate.
- All transaction data is encrypted for storage within eWAYÂ’s bank-grade data centre, further protecting your credit card data.
- eWAY is an authorised third party processor for all the major Australian banks. eWAY at no time touches your funds; all monies are directly transferred from your credit card to the merchant account held by Digital Cinema.
Delivery Charges
Digital Cinema will refund all delivery charges in the event an item has to be returned due to a fault or damage and no replacement items can be found. Delivery refund will only be approved within 14 days of purchase and all original packaging, accessories and manuals are included.
Consumer Guarantees and Your Rights Under the Australian Consumer Law
Refer to Consumer Guarantee laws for more information.
Refunds
Any Refunds will be made by Digital Cinema using the same method of payment used to make your purchase. Refunds will normally be processed within five (5) days.
Digital Cinema reserve the right to refund and cancel any order when the below occurs.
- Grossly incorrect pricing has been listed by accident due to human error.
- Items cannot be fulfilled due to stock issues.
- The sale is considered to be fraudulent and Digital Cinema considers the fulfillment of this sale may harm Digital Cinema.
You will be contacted by email to explain why a refund has been issued and products not delivered.
Returns and Repairs
Before returning any goods please contact our service team for approval and return merchandise number 1300 859 905
You may also contact Digital Cinema on 1300 859 905 or visit the store where the items were collected. A Digital Cinema team member will help you with any return or repair. This will include inspecting the products, organising for the products to be repaired, or offering you a replacement.
Products need to be returned within a reasonable time period. This timeframe may vary from product to product and may depend on the type of product you purchased and the price you paid.
If any goods cannot be easily returned to the Digital Cinema store, due to where you are located please contact our service staff for help with logistics 1300 859 905
Products returned under warranty will be assessed and/or repaired within a reasonable time period. You will be provided with a repair time after the item is assessed. This time may vary due to reasons beyond our or the manufacturer's control, such as parts availability and incorrect fault advice given.
You may be required to pay labour, assessment or freight costs, such as where goods are assessed to have been damaged by misuse or accident, or where the goods are assessed not to be faulty. We will provide you with a cost if this case arrises.
If any electrical goods that you returned may lose settings or user saved preferences during the resetting and rebooting phases in a repair sequence.
Purchasing from Digital Cinema is an acceptance of the above policies.
If you have any questions relating to your Order, please contact us on 1300 859 905 or email customer support on enquiry@digitalcinema.com.au.