Panasonic PT-RZ370 Full HD LED-Laser Projector delivers full High Definition image with 3,500 Lumens of brightness featuring LED/Laser-combined light source for solid and lasting brightness.

Long-Lasting Reliability and High Picture Quality
The LED/Laser-Combined Light Source Enables Approx. 20,000 Hours of Continuous Operation

This new light source requires no maintenance for approximately 20,000 hours. In many cases, this means no maintenance until your next refresh cycle. Naturally, there are no lamp burnout problems during use, so reliability is further increased. There is also no filter to clean due to carefully engineered sealed optics.

As a consequence, running cost is dramatically lowered because of the savings on lamp costs, maintenance labour and hassle of stocking lamps.

Bright, Beautiful Picture Quality for a Long Period of Time

The PT-RZ370/RW330 features 3,500 lumens of brightness. Rate of brightness deterioration in the LED/Laser-combined light source is extremely slow compared to lamp-based projectors. The SOLID SHINE drive uses a built-in sensor to constantly detect the light intensity of the light source and correct corresponding changes in white balance. This all helps to maintain excellent picture quality for a long period of time.

Contrast is outstanding too, at 10,000:1, and images are reproduced with a wide dynamic range. The PT-RZ370 also features a Full-HD (1,920 x 1,080) DLP™ chip, allowing highly detailed Full-HD images without resizing.

Superior Color Reproduction

The LED/Laser-combined light source has a higher level of colour purity than an ordinary lamp, allowing it to achieve colour reproduction with wider colour space. Colours are more vibrant than those of conventional projectors.

30x Drive Switching Prevents Color Breaking

In 1-chip DLP™ system projectors with conventional lamp, a colour wheel is used for time-division multiplexing in a method where the human eye combines the result to achieve a full-colour palette. In the PT-RZ370/RW330, this is done by on/off switching of the LED/Laser-combined light source. A unique Panasonic power supply circuit provides time-division multiplexing with ultrafast 30x drive.* The resulting, high-definition images exhibit virtually no colour breaking.

Heat Pipe Cooling System Maintains Stable Operation up to 45 °C (113 °F)

Laser cooling is performed by releasing the heat to cooling fins, then cooling with a heat pipe cooling system. This suppresses temperature rises inside the projector and allows stable operation up to an ambient temperature of 45 °C (113 °F). The use of this heat-pipe cooling system also achieves a quiet operation of 29 dB, enabling viewers to concentrate on the presentation or on quiet movie scenes.

Dust-Resistant Structure with an Airtight Optical Block

The area between the LED/Laser to the DLP™ chip and prism is hermetically sealed to form an airtight structure for the optical block, the heart of the projector. This resists the effects of dust and other particles in the air and enables the use of the projector in a wide range of environments.

The Daylight View Basic Ensures Clear Images Even in Brightly Lit Rooms

Panasonic’s Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone colour and brightness level according to the surrounding illumination.

DICOM Simulation Mode

This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity.

Rec. 709 Mode for HDTV Projection

Optimal colour reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709 when images from an HDTV source are projected.

Excellent TCO and Flexible Installation
Superior Total Cost of Ownership and Value

• Maintenance-Free

  The new LED/Laser-combined light source in the SOLID SHINE Series projectors provides approximately 20,000 hours* of operation with no lamp or filter replacement needed. This dramatically lowers maintenance costs and labour.

• High Reliability

  A highly durable system has been achieved with an originally designed, efficient cooling system for the new light source, and a dust-proof structure. You get stable operation and solid reliability for a long period of time.

• Flexible Installation

  System capabilities such as a 2x zoom lens, an exceptionally wide lens shift range, and 360-degree installation support highly flexible installation. DIGITAL LINK also enables long-distance digital transmission with a single cable.

Versatile First time and Replacement Installations

• 2x Zoom Lens

  The 2x optical zoom lens provides a wide throw range. For a 120-inch-diagonal widescreen, the projection distance extends from approximately 3.9 m (12.8 ft) to approximately 7.8 m (25.7 ft).

• Horizontal / Vertical Lens Shift

  The wide shift range accommodates various room sizes and shapes. When lights or ventilation holes are located in the ceiling mounting site, you can simply relocate the projector to avoid them.

• Flexible 360-Degree Installation

  The projectors can be rotated vertically. This means you can install one at any up-and-down angle you want, to accommodate different installation conditions.

• Lens-Centred Design

  A lens-centred, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning the installation site.

DIGITAL LINK Transmits Digital Signals up to 100 m (328 ft) with a Single Cable

Equipped with a DIGITAL LINK terminal, the PT-RZ370/RW330 allows transmission of HDMI, uncompressed HD digital video, audio and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.

• Optional ET-YFB100G Digital Interface Box for Easy Setup

  By combining the optional ET-YFB100G Digital Interface Box, with its HDMI and other input terminals, uncompressed HD digital video, audio and control signals can be transmitted up to 100 m (328 feet) over a single CAT5e (STP) cable or higher. It allows projector connection with only one cable, making it ideal for ceiling-mounted and other permanent installations. Also, because control signals can be simultaneously transmitted, the ET-YFB100G input signal can easily be switched with the wireless remote control that is included with the projector. The projector can be controlled by either serial or LAN communication.

• Also Supports Other Manufacturers’ Peripheral Equipment

  DIGITAL LINK is an original function added to HDBaseT™ technology. Signals from the ET-YFB100G can also be relayed to a non-DIGITAL LINK-ready projector by using another manufacturer’s equipment based on the same technology.

Abundant Connection Terminals, Including HDMI

Interfaces include HDMI and DVI-I inputs. The serial terminal (RS-232C) has an Emulate function that lets you continue using existing control systems when replacing previous Panasonic models. It is also possible to output audio during STANDBY MODE.* This is convenient when connecting an external audio system through the projector.** A closed caption decoder is built in.

Easy Remote Monitoring and Control over a LAN

Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you of the overall projector status.

In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.

The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors

Operation Friendly
Image Reaches Full Brightness Quickly? No Need to Wait for the Lamp to Warm Up

Images do not appear quickly with lamp-based projectors because the projector requires time to warm up. With the PT-RZ370/RW330, the image appears almost instantly. There’s also no cooling time required when turning the power off, so you can quickly turn the projector on and off as many times as needed.

24/7 Operation

Ordinary lamps are not well suited to continuous operation. Because the PT-RZ370/RW330 does not use a lamp, has an efficient cooling system and uses DLP™ chip that has a long life, they are capable of 24/7 operation.

Scheduling Function

Scheduled operation is possible using the built-in timer function, without having to use a PC and software.

Effective Theft Prevention with the Startup Logo

You can change the default Panasonic start up logo to any logo you want. A new logo can be easily uploaded by connecting a computer to the PT-RZ370/RW330 through the LAN or serial connection by using the Logo Transfer Software. An abundance of other security measures is also included, such as a security bar, Keylock, and Security Password. This is very effective for preventing theft.

15 m (49 ft) Long-Range Wireless Remote Control

A unique ID number can be assigned to each projector using the supplied wireless remote control unit. This allows operation of a desired projector when multiple units are set up at the same location. Three frequently used functions can be assigned to the Function buttons for instant recall