Parasound ZoneMaster 2 2 Channel 4 Speaker Amplifier with Sub Crossover
SKU
Parasound-ZoneMaster-2-Amplifier
Estimate Shipping
Share your home cinema stories with #digitalcinemaau
FOLLOW @DIGITALCINEMAAU ON INSTAGRAM
FOLLOW @DIGITALCINEMAAU ON INSTAGRAM
-
![]()
Official Leading Australian Dealer -
![]()
Full Australian Manufacturers Warranty -
![]()
Shipped with Tracking and Complimentary Insurance
Parasound ZoneMaster 2 2 Channel 4 Speaker Amplifier with Sub Crossover is a highly versatile two-channel, four-speaker power amplifier with A and B outputs for all channels. The compact 1/2 1U chassis takes up very little space.
ZoneMaster is Parasound's new line of high-performance amplifiers for custom installation. ZoneMaster amps combine legendary Parasound Class AB sound quality with the most reliable Class D power modules in the industry. Thanks to its high performance, build quality, and Parasound engineering, ZoneMaster is the new standard in residential and commercial amplification.
Among the ZoneMaster 2's many specialized features are a speaker level input for expanding systems without pre-out jacks, a looping output to connect additional amplifiers, mono mode combines L and R for single speaker applications, and separate level controls for both channels. There is also an 80 Hz low pass Mono RCA output (for sub) and a built-in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive subs.
System integration features include an audio-sensing auto-on trigger, a 12-volt auto-on trigger input, and a looping 12-volt trigger output. Detachable speaker connectors accept up to 12 gauge wire. ZoneMaster also has short circuit and overheat protection with front panel indicators and 0.5-watt standby power consumption, which meets Energy Star specs.
The Speaker Level Input Connector
The speaker level input is an additional type of audio input that any zone can select as its source. The speaker level input enables the ZoneMaster 2 to connect to any audio receiver or stereo system even if it lacks preamp output jacks.
This is a high impedance input and the ZoneMaster 2’s speaker-level input can connect to the speaker terminals on any receiver or amplifier. This will not reduce its output power or degrade the sound quality of the speakers that are already connected directly to the “host” receiver or amplifier. Audio connected to the speaker-level input connector can be routed to any zone by setting each zone’s Input switch to the Bus position. Speaker-level audio is also converted to line level and routed to the Bus Loop Out jacks which provide a line-level output to drive additional amplifiers.
Speaker A and B Outputs
The ZoneMaster 2 is equipped with connections for two speakers on each channel (labelled A and B). This unique feature gives system designers greater flexibility and can usually avoid the added expense, complexity, heat and power consumption of additional amplifiers. The ability of the ZoneMaster 2 to drive two pairs of speakers is credited to Parasound’s 2-ohm stable high-current design.
Typical applications for using both Speaker A and B outputs might include a large living room with four ceiling speakers. Another use for the B speakers could be in a subzone like a bathroom or hallway adjacent to the room where the A speakers are installed. This adjacent subzone might also use a passive in-wall volume control to adjust its listening level separately.
Speaker A and B Impedance
When you select the Stereo Mode the R and L channels are each capable of driving speaker loads as low as 2 ohms. An example of a 2 ohm load is one 4 ohm speaker connected to a channel’s speaker output A while another 4-ohm speaker is connected to the same channel’s speaker output B. When driving 2 ohm loads ensure the amplifier has adequate ventilation.
Key Features
- 120 watts x2 @ 8 Ω
- 150 watts x2 @ 4 Ω or 2 Ω
- 4 speaker connections (A and B outputs for both channels)
- High current for stable operation at 2 Ohms
- Class AB input stage plus premium Class D power stage
- Audio sensing auto-on trigger
- 12 volt auto-on trigger input
- Looping 12 volt trigger output
- Speaker level input for expanding systems w/out pre out jacks
- Looping output to connect additional amplifiers
- Mono mode combines L and R for single speaker applications
- Separate level controls for both channels
- Detachable speaker connectors accept up to 12 gauge wire
- Short circuit and overheat protection with front panel indicators
- 0.5 watt standby power consumption meets Energy Star & EU specs
ZoneMaster 2 Specific Features
- Compact 1u, 1/2 width chassis size
- "ZRK" Rack mount kit sold separately (click to view)
- Full Range Mono RCA Output
- 80Hz low pass Mono RCA output (for sub)
- Built in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive sub(s)
| Brand | Parasound |
|---|---|
| Number Of Channels | Stereo |
| Frequency Response | 20 Hz - 20 kHz, +0/-0.25 dB | 5 Hz - 50 kHz, +0/-3 dB |
| Watts RMS per Channel (4 Ω) | 150 Watts x 2 |
| Watts RMS per Channel (8 Ω) | 2 x 120 Watts |
| Signal-to-Noise Ratio | >112 dB, input shorted, IHF A-weighted |
| Total Harmonic Distortion (THD) | < 0.05 % at typical listening levels | < 1.0% at full power |
| Warranty | Australian Manufacturer Warranty |
Write Your Own Review
Refund, Return and Repair Policy
Digital Cinema strives to make every purchase a happy one.
Please read our Refund, Return Warranty Policy before making a purchase from Digital Cinema, our Outlined are Our policy on refunds, returns and repairs and your rights under the Australian Consumer Law.
Always inspect any products that we have delivered to you or that you picked up from the Digital Cinema store, to make sure you are completely satisfied with the condition of the products, including that the products are of merchantable quality.
If you have any questions about this policy, please contact our staff on 1300 859 905 or click here to email.
Change of Mind
Please choose carefully as refunds for change of mind would only be accepted with a restocking fee subject to approval. We recommend you carefully choose any products before adding them to your cart and continuing with your order. The restocking fee is 25% if approved.
Goods Damaged in Transit
If any products are delivered damaged, please contact our Customer service Staff as soon as possible. Digital Cinema will organise to have your products returned to Digital Cinema and to arrange for a replacement of your products fast. Damaged products need to be returned in the same condition received by you with all original packaging, accessories and manuals.
Digital Cinema Security Policy
Digital Cinema uses the eWAY Payment Gateway for its online credit card transactions. eWAY processes online credit card transactions for thousands of Australian merchants, providing a safe and secure means of collecting payments via the Internet.
All online credit card transactions performed on this site using the eWAY gateway are secured payments.
- Payments are fully automated with an immediate response
- Your complete credit card number cannot be viewed by Digital Cinema or any outside party.
- All transactions are performed under 128 Bit SSL Certificate.
- All transaction data is encrypted for storage within eWAYÂ’s bank-grade data centre, further protecting your credit card data.
- eWAY is an authorised third party processor for all the major Australian banks. eWAY at no time touches your funds; all monies are directly transferred from your credit card to the merchant account held by Digital Cinema.
Delivery Charges
Digital Cinema will refund all delivery charges in the event an item has to be returned due to a fault or damage and no replacement items can be found. Delivery refund will only be approved within 14 days of purchase and all original packaging, accessories and manuals are included.
Consumer Guarantees and Your Rights Under the Australian Consumer Law
Refer to Consumer Guarantee laws for more information.
Refunds
Any Refunds will be made by Digital Cinema using the same method of payment used to make your purchase. Refunds will normally be processed within five (5) days.
Digital Cinema reserve the right to refund and cancel any order when the below occurs.
- Grossly incorrect pricing has been listed by accident due to human error.
- Items cannot be fulfilled due to stock issues.
- The sale is considered to be fraudulent and Digital Cinema considers the fulfillment of this sale may harm Digital Cinema.
You will be contacted by email to explain why a refund has been issued and products not delivered.
Returns and Repairs
Before returning any goods please contact our service team for approval and return merchandise number 1300 859 905
You may also contact Digital Cinema on 1300 859 905 or visit the store where the items were collected. A Digital Cinema team member will help you with any return or repair. This will include inspecting the products, organising for the products to be repaired, or offering you a replacement.
Products need to be returned within a reasonable time period. This timeframe may vary from product to product and may depend on the type of product you purchased and the price you paid.
If any goods cannot be easily returned to the Digital Cinema store, due to where you are located please contact our service staff for help with logistics 1300 859 905
Products returned under warranty will be assessed and/or repaired within a reasonable time period. You will be provided with a repair time after the item is assessed. This time may vary due to reasons beyond our or the manufacturer's control, such as parts availability and incorrect fault advice given.
You may be required to pay labour, assessment or freight costs, such as where goods are assessed to have been damaged by misuse or accident, or where the goods are assessed not to be faulty. We will provide you with a cost if this case arrises.
If any electrical goods that you returned may lose settings or user saved preferences during the resetting and rebooting phases in a repair sequence.
Purchasing from Digital Cinema is an acceptance of the above policies.
If you have any questions relating to your Order, please contact us on 1300 859 905 or email customer support on enquiry@digitalcinema.com.au.